Path: chuka.playstation.co.uk!scea!greg_labrec@interactive.sony.com
From: matth@bellatlantic.net (Matthew Hulett)
Newsgroups: scea.yaroze.beginners
Subject: Re: HELP!!!
Date: Sat, 17 Jan 1998 20:55:42 GMT
Organization: SCEA News Server
Lines: 44
Message-ID: <34c115c6.668611@news.scea.sony.com>
References: <34C15122.8F0547F4@triplebeam.com>
NNTP-Posting-Host: client-119-113.bellatlantic.net
X-Newsreader: Forte Free Agent 1.11/32.235


   Hello,
   Well, I am going to assume you have your yaroze hooked up properly.
If you don't, go to the little red book, the Start Up Guide, and go
through pages 17-25 and set it up.
   Go to Dos or your windows Dos shell. Open the path to your PSX
folder, then type in djsetup and hit enter. Now you are prepared to
run the program. You can leave the program grouping where it is.
Set your path to the file with the executable. When you are in that
folder, turn on your yaroze and type in siocons and hit enter.
Once siocons boots, just hit enter to see if the double arrows
repeatedly appear. If not, go back to the start up guide and work at
getting your set up correct, because the PC and the yaroze are not
communicating properly.
   If so, then you need to take a look at your program grouping. Do
you have an auto file? If so, hit F3 and type auto, then enter.
Do you have just a batch file? If so, do the same, typing batch, of
course. These are the most common occurances, but sometimes you need
to hit F4 and enter the object file. I have never seen a .cpe file. I
have seen .pxe, auto, batch.bat, main files loaded by batches or auto,
etc... Loading just the .cpe by F4 may not work properly, unless you
aren't loading any other stuff, like TMDs, VABs, etc..  Then hit
enter.
   This is the best I can offer, perhaps someone else will chime in.
If these things don't work, provide some more information on your
program grouping so what you are doing is more clear.
   Matt

>Hey folks,
>
>I am NOT a programmer but merely an aspiring one.  My background happens
>
>to be art... anyways, I am in need of some help getting my Yaroze to run
>an
>executable file.  I had a friend create something for me, but I can't
>seem to get it up(no pun intended).
>
>I guess what I really need is directions on where to put the executables
>
>and the .cpe file.  Then how to launch the app.
>
>Anyone?
>