Path: chuka.playstation.co.uk!scea!wal From: wal@blarg.net (wayne a. lee) Newsgroups: scea.yaroze.beginners Subject: Re: Memory card? Date: Tue, 12 May 1998 02:01:23 -0700 Organization: SCEA News Server Lines: 29 Message-ID: References: <35571A81.4D913768@yourlink.net> NNTP-Posting-Host: dnai-207-181-237-170.dialup.dnai.com Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit X-Newsreader: Yet Another NewsWatcher 2.4.0 In article <35571A81.4D913768@yourlink.net>, Abstrakt wrote: > MAC user, I am having a problem getting my yaroze to recognize the > memory card, I have tried several different things, ie. format the > memory card using the app that was included in the package and even > tried purchasing a new card but it still won't see the card, I have all > the obvious things troubleshooted and now I am stuck. Can anyone help > me? I had problems trying to get the connection speed saved to the memory card, but I did manage it. Let's see if I can remember how... First, I downloaded and ran the card formatting utility. Then, I think I quit PSComUtil and reset the yaroze. Then I used ZTerm (a shareware terminal program) and set its baud rate to 9600, using the serial port that the Yaroze is connected to. Using ZTerm you can send and receive console commands. Then I typed the command "BAUD 57600" and hit RETURN. I think at this point I got prompted to save the new baud setting to the memory card, but it may have been at a later point... in any case, I had to change ZTerm's settings to 57600, to match what I had told the yaroze. Hmm... maybe the save prompt came *after* switching ZTerm's baud rates... Sorry this is so muddled, I should have kept better notes! But give ZTerm a shot (or another terminal emulator program). -- wayne a. lee