Path: chuka.playstation.co.uk!scea!greg_labrec@interactive.sony.com
From: mperdue@iquest.net (Mario Perdue)
Newsgroups: scea.yaroze.problems.pc
Subject: Re: "still having problems"
Date: Thu, 03 Jul 1997 02:50:08 GMT
Organization: SCEA Net Yaroze News
Lines: 21
Message-ID: <33bb11f6.44316817@205.149.189.29>
References: <33B7010E.3CB7@earthlink.net> <33b7f084.597353@205.149.189.29> <33B7F80A.2395@earthlink.net> <33B98227.23FE@earthlink.net> <33b99fad.32394434@205.149.189.29> <33B9A1E4.81A@earthlink.net> <33B9C526.76F1@earthlink.net> <33BAAFB1.35F0@earthlink.net> <33bad9be.29922643@205.149.189.29> <33BACA8E.FB4@earthlink.net> <33BACE7E.1F23@earthlink.net> <33BAEEBD.67D@earthlink.net>
NNTP-Posting-Host: firewall.hrtc.net
X-Newsreader: Forte Free Agent 1.1/32.230

Linda,

You're getting warmer :^)

Make sure you have set the environment variable DTLH3000 correctly.
This varible tells the system which COM port and IRQ to use. This is
documented in the Start Up Guide. Also, make sure the cable is plugged
in all the way on each end.

Mario

On Wed, 02 Jul 1997 17:13:49 -0700, "Linda J. Hodge"
<hodgke@earthlink.net> wrote:
>Ok this is what I did.I added this to my config.sys
>"Device=C:\dos\Ansi.sys" and I dont see that dum stuff anymore
>when I run siocons and I see colored text now too. But there is no ">>"
>and when I press f3 I get this"BINARY WRITE:Timeout!"
>			      "auto commands allstop"
>And then a "little heart" at the botttom