Path: chuka.playstation.co.uk!scea!greg_labrec@interactive.sony.com
From: "Linda J. Hodge" <hodgke@earthlink.net>
Newsgroups: scea.yaroze.problems.pc
Subject: Re: "still having problems"
Date: Wed, 02 Jul 1997 20:03:05 -0700
Organization: SCEA Net Yaroze News
Lines: 48
Message-ID: <33BB1669.42CD@earthlink.net>
References: <33B7010E.3CB7@earthlink.net> <33b7f084.597353@205.149.189.29> <33B7F80A.2395@earthlink.net> <33B98227.23FE@earthlink.net> <33b99fad.32394434@205.149.189.29> <33B9A1E4.81A@earthlink.net> <33B9C526.76F1@earthlink.net> <33BAAFB1.35F0@earthlink.net> <33bad9be.29922643@205.149.189.29> <33BACA8E.FB4@earthlink.net> <33BACE7E.1F23@earthlink.net> <33BAEEBD.67D@earthlink.net>
Reply-To: hodgke@earthlink.net
NNTP-Posting-Host: max3-so-ca-35.earthlink.net
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
X-Mailer: Mozilla 3.0C-NSCP  (Win16; U)

Linda J. Hodge wrote:
> 
> Linda J. Hodge wrote:
> >
> > Linda J. Hodge wrote:
> > >
> > > Mario Perdue wrote:
> > > >
> > > > On Wed, 02 Jul 1997 12:44:49 -0700, "Linda J. Hodge"
> > > > <hodgke@earthlink.net> wrote:
> > > >
> > > > >Linda J. Hodge wrote:
> > > > >"<-[36;1msiocons--Playstation debugging console for DTLH3000 1996/05/10
> > > > >00:00:03"
> > > > >"type <-[7m F1 <-[0;36;36;1m---->display help"
> > > > >"when hung up try type <-7m ESC <-[0m"
> > > > >"I/O addr=0x03F8,IRQ=4(vect=0x000C,8259=20)"
> > > > >"BAUDRATE=9600"
> > > >
> > > > >In the manual it doesn't show all that "<-[7m <-[0m" crap so that must
> > > > >be whats wrong. Oh and no ">>" at the end.
> > > >
> > > > and
> > > >
> > > > >What about this 'siocons' program mario?I still get this stuff with
> > > > >siocons when I have run make
> > > >
> > > > Siocons is running correctly but it looks like you havn't installed
> > > > ANSI.SYS. Make sure you have the file ANSI.SYS in your WINDOWS
> > > > directory and that your CONFIG.SYS file contains the line:
> > > >
> > > > DEVICEHIGH=C:\WINDOWS\ANSI.SYS
> > > >
> > > > Mario
> > > The line is in my config .sys,But I dont know about the windows
> > > directory Ill check.
> > No I dont see "ansi.sys" in my windows directory.what should I do?
> > reinstall everything!!?!
> Ok this is what I did.I added this to my
> config.sys"Device=C:\dos\Ansi.sys" and I dont see that dum stuff anymore
> when I run siocons and I see colored text now too. But there is no ">>"
> and when I press f3 I get this"BINARY WRITE:Timeout!"
>                               "auto commands allstop"
> And then a "little heart" at the botttom
Well Ive checked everything And I still get no >> . Ive plugged in the
jack firmly and I still go no >> .I took out my printer and still.I
checked what com port I am on,and it says what is displayed on the
screen.I changed even plystations!!!  I dont know what to do.