Path: chuka.playstation.co.uk!scea!greg_labrec@interactive.sony.com
From: bobt10@cris.com
Newsgroups: scea.yaroze.problems.pc
Subject: Re: siocons - DTLH3000 not ready!
Date: Sat, 26 Apr 1997 14:27:04 -0500
Organization: SCEA Net Yaroze News
Lines: 19
Message-ID: <33625708.3EF@cris.com>
References: <3360340D.1F5@cris.com> <3360E811.4843@interactive.sony.com> <336184A9.5068@cris.com>
Reply-To: bobt10@cris.com
NNTP-Posting-Host: 61026d0020ch.concentric.net
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
X-Mailer: Mozilla 3.0 (Win95; I)

David Price wrote: 
> COM2 works fine with the Metrowerks PSComUtil, so there is something
> different about siocons.  Unfortunately PSComUtil doesn't run the
> auto scripts that come with Yaroze programs.

If you run siocons without specifying the port, irq, baud rate, etc.
it will use the DTLH3000 environment variable set in djsetup.bat.

You have to modify the djsetup.bat file so that it uses the port
and irq for COM2.  The line would look like this for a normal
COM2:

set DTLH3000=0x2f8,3,9600

This is what I use and it works ok.  The only difference on mine
is the baud rate is set to 115200.  If you have a memory card
with a free slot, you can save a higher baud rate on it and then
the next time the console is restarted, it will see the setting
on the memory card.