Path: chuka.playstation.co.uk!scea!greg_labrec@interactive.sony.com
From: Pradip Fatehpuria <pradip_fatehpuria@interactive.sony.com>
Newsgroups: scea.yaroze.problems.pc
Subject: Re: siocons
Date: Mon, 28 Apr 1997 10:46:25 -0700
Organization: Sony Computer Entertainment America
Lines: 22
Message-ID: <3364E271.7B39@interactive.sony.com>
References: <3361C6AD.2AD5@bendnet.com>
NNTP-Posting-Host: 206.41.6.40
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
X-Mailer: Mozilla 3.0 (Win95; I)

Chad Meyers wrote:
> 
> After running Siocons, it stops after displaying the baud rate.  [enter]
> has no effect.  All I can do is hit [Esc].  The only way I can get
> siocons to work is if I first run PSComUtil, load and execute a sample,
> exit pscomutil, and then run siocons...After this process it works
> perfectly.  I'm running it from a dos window.  The Yaroze is on COM1 and
> there aren't any conflicts.  What am I doing wrong?
> 
> Chad


Are you running DJSETUP.BAT before running the siocons.  DJSETUP.BAT
sets up an environmental variable "set DTLH3000=0x3f8,4,9600" which sets
the IOAdress and IRQ used by the com port.  Please check for these in
you system setup of COM1.  Also the default speed is set to 9600 baud.
If you have changed the speed to a higher one and saved the config on
the memory card, then set the speed in the above var to the new one.

Pradip K Fatehpuria
Sr Software Development Engineer
Sony Computer Entertainment America Inc.