Path: chuka.playstation.co.uk!news1.scei.co.jp!scea!greg_labrec@interactive.sony.com
From: "Sean D. Evans" <sevans@worldchat.com>
Newsgroups: scea.yaroze.problems.pc
Subject: Re: siocons
Date: 4 May 1997 05:06:41 GMT
Organization: SCEA Net Yaroze News
Lines: 19
Message-ID: <01bc5848$d5fdc940$8c3bbbcc@sevans.worldchat.com>
References: <3361C6AD.2AD5@bendnet.com> <3364E271.7B39@interactive.sony.com>
NNTP-Posting-Host: pmdial40.SpectraNet.CA
X-Newsreader: Microsoft Internet News 4.70.1155

I am having the same problems with siocons.  I have checked everything
mentioned here.  I have run batch file first, the baud rate is correct, the
com port is correct, the IRQ and the memory address is correct.  Still, I
get no >> after running siocons and pressing enter.

Is there something else that could be wrong?


> Are you running DJSETUP.BAT before running the siocons.  DJSETUP.BAT
> sets up an environmental variable "set DTLH3000=0x3f8,4,9600" which sets
> the IOAdress and IRQ used by the com port.  Please check for these in
> you system setup of COM1.  Also the default speed is set to 9600 baud.
> If you have changed the speed to a higher one and saved the config on
> the memory card, then set the speed in the above var to the new one.
> 
> Pradip K Fatehpuria
> Sr Software Development Engineer
> Sony Computer Entertainment America Inc.
>