Path: chuka.playstation.co.uk!news From: "Peter Armstrong" Newsgroups: scee.yaroze.freetalk.english Subject: Re: setting up terminal speed on yaroze Date: Mon, 9 Oct 2000 23:03:38 +0100 Organization: PlayStation Net Yaroze (SCEE) Lines: 34 Message-ID: <8rtfg6$7q2@chuka.playstation.co.uk> References: <8rt2gd$7q1@chuka.playstation.co.uk> NNTP-Posting-Host: host62-7-121-73.btinternet.com X-Priority: 3 X-MSMail-Priority: Normal X-Newsreader: Microsoft Outlook Express 5.00.2314.1300 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 Hi, Run siocons and at the prompt type in baud 115200, then exit siocons and re-run it (as siocons -B115200). Press enter a couple of times and you'll be asked whether you wish to save the new rate to memory card, and that's it. There's a PC enviroment variable, DTLH3000, in either djsetup.bat or autoexec.bat. Set the last value to 115200 if it isn't already, so you don't need to specify siocons' baud rate each time you run it. Speaking of baud rates, does anyone have a PC that supports a port baud rate of 230400bps? It appears to be possible to change the psx port rate to this speed, by changing the value in the CIP memory card save, but I'm not in a position to test if it works. Peter Daniel Brown wrote in message news:8rt2gd$7q1@chuka.playstation.co.uk... > Does anyone know how to set up the terminal speed on the yaroze? as I need > to get a new value on the memory card as the old one does not work and the > default 9600 sucks big time... > > Cheers, > > Daniel > >