Path: chuka.playstation.co.uk!news
From: "Max" <mad.max@which.net>
Newsgroups: scee.yaroze.freetalk.english
Subject: Re: Hey all!
Date: Tue, 18 Dec 2001 12:25:20 -0000
Organization: PlayStation Net Yaroze (SCEE)
Lines: 34
Message-ID: <9vncvp$4238@www.netyaroze-europe.com>
References: <9vklpa$4234@www.netyaroze-europe.com> <3C1F1F8B.753790C6@peregrine.com>
NNTP-Posting-Host: modem-1084.abra.dialup.pol.co.uk
X-Priority: 3
X-MSMail-Priority: Normal
X-Newsreader: Microsoft Outlook Express 5.00.2314.1300
X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300

I am getting the same problems now, I have an AMD and when running a
Codewarrior .pse file it
freezes upon exit. I have tried first the first patch then the second then
both together and not one of the
combinations seems to work, I have no optimisation as I'm still operating in
debug...

Any answers, clues?

Max



> Yeah, thats pretty much the situation with the patches.  I don't think
> that the patch was a fix specifically for AMD machines though, just a
> general CW patch.  The reason I thought it was an AMD issue is because
> that was the 1st time for me to do anything with one (i'd been using
> pentiums up until that point), it just turned out that I had kept my old
> PC updated with the latest patches while my old desktop was just lying
> around not getting used much, so it wasn't getting updated.  When I
> swapped the drives over I forgot about this and thought it was a
> hardware issue, duh!! :)
>
> Since I have installed the patch I can now exit cleanly back to the
> brick screen with level 4 optimisation on, which definitely makes a
> difference in GG [>240 VSyncs down to around 140 in the worst case :)].
> But unfortunately it doesn't fix the assembler - CW doesn't seem to
> recognise some of the opcodes that the debugger shows you, and as for
> labels, forget it :(  [unless of course I am using it wrong, always a
> possibility :)]
>
> Andy