Path: chuka.playstation.co.uk!news From: "Max" Newsgroups: scee.yaroze.freetalk.english Subject: Re: CW Debugger Date: Wed, 19 Dec 2001 12:34:24 -0000 Organization: PlayStation Net Yaroze (SCEE) Lines: 39 Message-ID: <9vq1ss$9vd5@www.netyaroze-europe.com> References: <9vlbuu$4235@www.netyaroze-europe.com> <9vlcn9$4236@www.netyaroze-europe.com> <9vlujn$4237@www.netyaroze-europe.com> <9vntgm$9vd1@www.netyaroze-europe.com> NNTP-Posting-Host: modem-1236.ballistic.dialup.pol.co.uk X-Priority: 3 X-MSMail-Priority: Normal X-Newsreader: Microsoft Outlook Express 5.00.2314.1300 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 Yeah, thats the method I use now i.e. load all data (apart from exe) to the NY through siocons then upload the exe through the debugger. Strange thing is that when I run my program in debug from siocons it works perfect but under codewarrior it draws about four multicoloured horizontal lines across the screen and freezes. Also, I have to close the DOS box that I was running siocons in before CWDebugger will upload the exe even though I terminate siocons... thats a bugger because every time I want to re-upload the data I have to open the DOS box again. Is there a way to free the com port without closing the DOS box? Max Nigel Critten wrote in message news:9vntgm$9vd1@www.netyaroze-europe.com... > I gave you my normal Auto.sio when it should be the debug version which > doesn't have the "ny.pxe" or "go" statements... > > so reads > > ;---------------------- > local dload data\font1.tim 80198010 > local dload data\gribbly.tim 80199050 > local dload data\tiles.tim 801ad270 > ;---------------------- > > As Chris said the NY.pse is lauched from CW, but you just need to upload > your data before running, for obvious reasons... (Blank screen... Unhappy > Yaroze... are just 2 of many :) > > Nigel > > >